BASE & GUIDE WAYS : The base is made of close grained and heavily ribbed casting for high rigidity. The hand scraped V-flat table guides ways with continuous lubrication. Longitudinal hand travel of the table is by rack and pinion Gear Box arrangement and automatic travel by hydraulic mechanism.
HYDRAULIC SYSTEM :
It consist of hydraulic Pump, Valves, Livers, Piping, etc. and all conveniently housed in the base.
WHEEL HEAD : The wheel head spindle is made of case hardened Nickel chrome alloy steel grounded and micro finished & runs in adjustable white metal bush bearings to achieve high accuracy and long life. Drive to the wheel head is transmitted two ‘V' belts.
WORK HEAD : Work head spindle is made of case hardened Nickel chrome alloy steel and runs in angular contact bearing. The drive to work head is built for stationary and live spindle grinding. The work head can be swiveled for angular grindings.
TAIL STOCK : The hardned and grounded tail stock spindle is adjustable and spring loaded.
INTERNAL SPINDLE HEAD (OPTIONAL ) : The unit with its independent drive motor is hinged on the wheel head and can be quickly lowered into grinding position easily. The internal grinding spindle runs in two precision matchpair angular contact bearings, the drive to the spindle is transmitted by Flat belt.
COOLANT : Genereous coolant supply is provided with electrical pump fitted on separate tank is of 90 Liters approx.
ELECTRICALS : The machine is supplied with electrical suitable for the supply of 400/440 volts. A.C. 50 Cycles. The motors are of reputed make. The electrical panal is mounted on one side of the machine, push button station is located at easy reach to the operator.
